Vacuum annealing furnace
Vacuum annealing furnace
Vacuum annealing furnace Uses and Features
(1) Use
Vacuum annealing furnace is a classification of vacuum heat treatment furnace, mainly for stainless steel drawing parts, such as plumbing equipment, water swelling parts, sales, medical equipment, stainless steel nails, stainless steel screws, riveted, stainless steel bearings, case, belt, tools, micro shaft, self drilling, tableware and other stainless steel products in protective atmosphere under the control of continuous bright annealing, solution, demagnetization and hardened stainless steel multi-purpose furnace. After treatment products smooth surface, no oxidation, no decarburization. With high efficiency, low energy consumption, less pollution, easy operation, low labor intensity is also available for metal material brazing, sintering purposes. Department of the introduction of digestion In early 90's most advanced products abroad.
(2) Features
1. High-speed steel, high alloy tool and mold steel annealing.
2. Electrical magnetic annealing.
3. The non-ferrous metals, stainless steel bright annealing solution treatment.
4. Available with vacuum sintering of magnetic materials.
The series of horizontal annealing furnace with a graphite furnace and metal furnace in two ways: graphite furnace heat generator graphite rods, heat shield, mostly carbon felt and ceramic felt. Metal furnace heating body is metal molybdenum, molybdenum heat shield is made of metal and stainless steel, the main material used for special alloy, soft magnetic alloy and the like. High degree of automation control system, stable and reliable. Wherein the temperature is controlled by intelligent temperature controller, action using FX2N programmable controller.
Vacuum annealing furnace classification
1, horizontal vacuum annealing furnace: horizontal vacuum annealing furnace is mainly used in special materials, stainless steel, vacuum annealing selenium steel core, the precious metal parts, silver-copper composite rivets and sheet member.
2, vertical vacuum annealing furnace: vertical vacuum annealing furnace products using vacuum protection mode, when the first operation of the furnace heat treatment furnace evacuated to a certain vacuum degree, usually somewhat less vertical furnace temperature uniformity, loading less material, but small footprint, low power, low cost, and so on. Equipment mainly used in non-oxidizing bright annealing machine parts, silicon, copper, copper wire and the like.
Technical Data |
|||||
Model |
VWFT-100 |
VWFT-200 |
VWFT-300 |
VWFT-500 |
VWFT-800 |
Size |
500×300×300 |
600×400×400 |
750×500×500 |
900×600×600 |
1200×800×800 |
Loading capacity |
100kg |
200kg |
300kg |
500kg |
800kg |
Heating Power |
60Kw |
80Kw |
120Kw |
150Kw |
210Kw |
Max Temperature |
1300℃ |
1300℃ |
1300℃ |
1300℃ |
1300℃ |
Uniform Temperature |
±5℃ |
±5℃ |
±5℃ |
±5℃ |
±5℃ |
Ultimate vacuum Pa |
4×10-1or |
4×10-1or |
4×10-1or |
4×10-1or |
4×10-1or |
Pressure Rising Rate |
0.67Pa/h |
0.67Pa/h |
0.67Pa/h |
0.67Pa/h |
0.67Pa/h |
Air Pressure |
≤2bar |
≤2bar |
≤2bar |
≤2bar |
≤2bar |
Double Suction Split Case Centrifugal pump Technical Parameter: Diameter of outlet: DN80 to DN1500 Pump flow range: Q≤ 11600m3/h Pump lift head range: H≤ 200m...
Vacuum brazing furnace Vacuum brazing furnace that is in a vacuum state, a group of weld filler metal member is heated to a temperature above the melting point but below the melting temperature of the metal substra...
2BE1 series water ring vacuum pumps - compressors Product Overview &n...
Email: contact@antsalliance.com | Tel: +86-21-50878190 | Skype: kevin.law012
Vacuum Pump - Vacuum System - Vacuum Valve -Vacuum Furnace - Vacuum Coating Machine - Vacuum Spare Part - Vacuum Compressor | Vacuum Pump | Vacuum Coating Machine | Vacuum Furnace